A furnace is only as good as its controller allows it to be. To exploit the full performance of our furnaces, all switch and control units are matched to the individual furnace models and also to the requirements of our customers in an optimum manner.
The new generation of program controllers C30 and C40 permit not only optimum process control, but are also distinguished by their simple, straight forward operation and comprehensive features.
 | Control of an extra function (4A, 230 V) which can be switched on during the process, e.g. for ventilation flap, cooling fan, catalyst etc. | |
| Automatic timer for programmable switch-on or start time. | |
| LCD display with 4 text lines of 20 characters each. | |
| Adjustable control parameters. | |
| Programming of date and time. | |
| Digital interface RS 485 for linking to a PC. | |
| Program Controller C40 extras : | ||
| Control of 2 extra functions (4A, 230 V). | |
| Installation in wall-mounted or free-standing cabinet. | |
| Suitable for multi-zone control with digital setpoint transmission. | |
| Suitable for various thermocouple inputs K (N), S |
 Program Controller C5
|
Many applications require just one programmable heating-up ramp and ore adjustable dwell time to run the whole process. Nabertherm can offer optimum solutions even for this purpose. The Program Controller C5 or C6 D offers precisely what's needed for simple applications: one heating-up ramp and one dwell time. With this you acquire a favourably priced, practice-orientated temperature controller which is naturally matched to the requirements of our furnaces and offers the quality features you can expect from Nabertherm.
Features :
| Extremely simple and staight forward operation. | |
| Programmable heating-up ramp and dwell time. | |
| Thermocouple input type K (N) or S. | |
| Various electronic safety devices. | |
| Installation in wall-mounted or free standing cabinet. | |
| Program Controller C5 (400V) / S5 (230V) extras : | ||
| Programmable start delay time. | |
| Mounted directly on the furnace. | |
| C5 with key-operated switch, S5 with rocker switch. |
Furnace according to the a.m. description with Controller C6 and seperate On - / Off - switch.
| Operation - friendly, dust-proofed foil keyboard. | |
| Exact programming in steps of 1 degree celcius resp. 1min . | |
| Adjustable time for one heating-up ramp. | |
| Pre-adjusted (changeable) regulating parameters. | |
| Several electronic safety components. | |
| Thermocouple - inputs type K (1200 degrees celcius) or type S (1400 degress celcius). |
| Especially for melting and holding furnaces | |
| Controller for temperature in furnace cavity and melt | |
| 7-day-preselective timer | |
| Power indication | |
| Alarm contact | |
| Thermocouple PtRh-Pt, type S and NiCr-Ni, type K for melt |
| Programmer for 6 program steps (ramp or holding time) | |
| Storage for 9 programs | |
| 3 programs can be combined to have a 18-steps-program | |
| Automatic switch-on | |
| Extra function to switch a fan | |
| Thermocouple PtRh-Pt, type S |
Controller P 320
| Very easy to operate. | |
| Dust proof foil key pad. | |
| Controlled by microprocessor. | |
| Precise regulation: reproducible accuracy better than 3 degrees celcius. | |
| Programmable in steps of 1 degree celcius and 1 min. | |
| Storage for 9 programmes with each 4 ramps and holding times. | |
| Accoustic alarm can be switched on and off automatically. | |
| Earth contact female plug 230 V - 10 A at the rear of the furnace to connect fan or other extra function. | |
| Max. 3 programmes can be combined. | |
| Realtime clock for programming of a starting time (day, hour, min) | |
| Thermocouple type K (L3/S - L9/S) or type S (L3/SH - L9/SH) | |
| Integrated solid state relay | |
| Delivered ready for use with 2 m cable and earth contact plug | |
| Designed for professional use |