|
Ceramotherm N 300/H | | 
For firing ceramics,
stoneware and soft pasteporcelain. Available in sizes from 100 to 2200 volume.
Heating on 5 sides, uniform temperature distribution.  |
Ceramotherm N 100 | | Also
available for temperature 900, 1280 and 1400 degrees Celsius.
|
|
Hobbytherm N 54E | | 
For
firing of ceramics, especially for home use. Economical to run. Heating 2 sides.
 |
|
Mobilotherm W 1000 |
 | | 
For firing ceramics
and for heat treatment of metal and other materials. Also available for 900, 1340,
1400 degrees Celsius. |
|
 | | 
Tilting crucible furnaces
for melting and holding of aluminium-alloys and for holding of CU-alloys.
Crucible furnaces for
melting and holding of CU-alloys.  |
Liquitherm B250 | | 
Bath furnaces for holding
of aluminium. Incredibly low energy consumption. Very clean melt. Special Bath
material.  |
|
Multitherm
N 11 | | 
Multi-purpose muffle
furnace and box-type furnace for heat treatment of materials and applications.
N7+N11+N7H+N11/H+N11HR: Connecting to 230V.   |
|
 |
Box-Type furnaces for
heat treatment applications.
| | |  | | High-grade
multilayer insulation. | | | High
quality heating elements, supported on tubes allowing free radiation into the
chamber. | | | Heating
from two walls and bottom. | | | Bottom
heating covered by silicon-carbide-plate. | | | Very
uniform temperature distribution (approx. 10 degrees Celsius, class B10 / C 13
DIN 17052) | | | Furnace
casing made from aluminized sheet steel | | | 2
coats of high grade enamel paint. | | | Simple
parallel-movement counterbalanced door. | | | Electronic
control system with thermocouple Pt-Rh/Pt, type S. |
| | Door
safety switch. | | | Additional
safety contactor. | | | Standard
voltage: 400 V 3/N, special voltage possible. | | | Side
element protection tiles optional. | | | Protective
gas connection and sealed casing upon request. | | Multitherm
Tmax 1300 Degrees Celsius | | | Special
insulation. | | | High-purity
supporting tubes. | | | Special
heating elements. | |
| |
|
Labotherm L 3/C6
Labotherm
L 5/C6
Labotherm L 3/S | | 
| | | | | Furnace
casing of stainless steel | | | High
grade insulation by vacuum-formed fibre module with low thermal mass or fire-light
brick insulation | | | Low
weight, compact design | | | Short
heating-up periods | | | Observation
hole in the door | | | Vapor
vent in the rear to connect fan or catalyser | | | Heating
wire of high quality in ceramic plates, protected against mechanical damages and
easy to exchange | | | Heating
from two sides (L3/.) or bottom and top (L5/. and L9/.) |
| | High-grade,
extremely resistant powder-coating | | | Switchgear
integrated underneath the furnace chamber. Available in 2 variations. |
| | Earth
leakage breaker for personal protection | | | Solid-state-relay |
| | Delivered
ready for use with 2 m cable and earth-contact plug |
| | Designed
for professional use | |
|
|
 Labotherm
N 60/H | | 
| | High
grade heat insulation of microporous fibre panels and special light-weight bricks |
| | Supporting
tubes suspend heating elements and ensure direct radiation in the chamber |
| | Heating
from all the walls, door,rear and bottom | | | Bottom
heating covered by silicon-carbide plate | | | Very
uniform temperature distribution (approx. 10 degrees Celsius |
| | Observation
hole in the door | | | Kiln
casing made from aluminized sheet-steel top cover of perforated stainless-steel
sheet | | | Multicoated
stoved paint | | | Vapor
vent on the right side with Bypass-connector | | | Door
safety switch | | | Switch
gear mounted on the back with a platinum-rhodium-thermos couple, additional safety
contactor and plug connection for program controller |
| | Delivered
ready for use with 2 m cable and earth-contact plug | |
|
 
Supertherm HT 10/18 |
 |
